Features
Specifications
1. Manual Supercharger
Rated pressure: High pressure 63, Low pressure 1
Fuel tank capacity: 0.7L
Rated displacement (ML/time): High pressure 2.3, Low pressure 12.5
Weight: 7KG
Maximum hand crank force: ≤ 500N
Pumps: Dual pumps, single oil circuit
2. Grease Gun
Specifications: 400CC
Maximum pressure resistance: 10000 PSI
Oil output: 1 OZ/40 times
Working pressure: 6000 PSI
Packing weight: 1.3 KG
3. Automatic Transmission Fluid Flushing and Complete Replacement Device
Voltage: DC12V (with gas battery cable)
Maximum power: 130W
Pressure gauge: 0~10 KG
Filter precision: 5 μm
Fuel tank: 15L x 2
Oil return pipe length: 2.4m
Oil outlet pipe length: 2.4m
Oil drain pipe length: 1.2m
Equivalent exchange error: ±20ml
Relative humidity: <85%
Working temperature: -10℃~+40℃
Noise: <70db
Volume (cm): 44×48×90
Gross weight: 52kg
4. Hydraulic Power Steering Gear (GUR) Oil Change Device
Four sub-pumps can be changed at the same time, which is quick and time-saving
Large capacity new oil drum (4L) and old oil drum (3L)
New liquid/old liquid observation window, before and after effect comparison
Filling with an electric pump can prevent the new liquid from being mixed with water
Vacuum recovery of old oil/evacuation of new and old oil/flushing of brake lines
Automatic pressure relief to prevent oil pot explosion
Applicable to models in Europe, America, and Asia, effectively solving the time-consuming and laborious problem of manual replacement of brake fluid
Improve the working performance of the brake system and extend the service life of the brake system
Technical Parameters
Working voltage: DC12V
Maximum power: 35W
Filling pipe: 2.5m
Oil return pipe: 3.5m+2.5m one-to-four design
New oil tank capacity: 4L
Old oil tank capacity: 3L
5. Brake Fluid Replacement Device
Voltage: DC12V (battery line)
Maximum power: 150W
Operating temperature: -10℃~+40℃
Pressure gauge: 0~1.0Mpa
Old oil tank capacity: 8L
New and old tank capacity: 4L
Packing size: 69cm×49cm×105cm
Gross weight: 40kg
Functions:
Brake oil filling function
Brake oil recovery function
Brake oil replacement function
Brake pipe cleaning agent function
Features:
Digital stepless adjustment to control oil change speed, easy to operate
Anti-explosion high-strength high-crystal panel, impact-resistant, high-temperature-resistant, corrosion-resistant, and easy to clean
Oil change can be done by positive pressure filling, negative pressure oil suction, or positive and negative pressure synchronous method
New and old oil pipelines are designed independently to prevent cross-contamination between new and old oils
Powerful recovery function, can quickly recycle old brake fluid at the same time
Stainless steel large-capacity oil barrels, with windows to observe and compare the color difference between new and old oil
External new/old oil flow pressure gauge, can observe the pressure to achieve the purpose of oil change
High-quality corrosion-resistant oil pipe is durable and the trolley type is easy to move
Effectively solve the problem of incomplete manual replacement of brake fluid
Equipped with various specifications of special connectors, suitable for models in Europe, America, and Asia
6. Pneumatic Waste Oil Collector
Maximum oil receiving height: 1.6M
Minimum oil receiving height: 1.3M
Oil tank capacity: 80L
Measuring cup capacity: 10L
Equipped: