Features
Specifications
Product Introduction
The equipment uses the automobile external lighting system physical as the basis, fully displaying the automobile external lighting system structure and working process. It is suitable for the teaching needs of the theory and maintenance training of the automobile lighting system in schools.
Functional characteristics
The real and operational automobile external lighting system fully displays the composition and structure of the automobile external lighting system.
Operating a variety of light switches can be a real demonstration of the car’s external lighting system working process.
The teaching board is made of advanced aluminum-plastic board with high impact resistance, pollution resistance, fire resistance, and moisture resistance, and the surface is treated by special process spraying primer; school students can directly compare the circuit diagram and the object, understand and analyze the working principle of the automobile lighting system.
Detection terminals are installed on the panel of the teaching board, which can directly detect the electrical signals of each circuit component of the automobile external lighting system, such as resistance, voltage, current, frequency signals, etc.
The surface of the teaching board is made of 1.5mm cold plate, which is beautiful in appearance. The bottom frame is welded with steel structure, and the surface is treated with spraying process. It is equipped with a self-locking caster device. The table top of about 40 cm is equipped on the base of the teaching board, which is convenient for placing data and light testing instruments.
The teaching board uses ordinary 220V AC power supply, which is converted into 12V DC power supply through the internal circuit transformer rectifier, without the need for a battery, reducing the trouble of charging. The 12V DC power supply has the function of preventing short circuit.
Technical specification
Overall size: 1240×600×1700 mm (length × width × height)
External power supply: AC 220V±10% 50Hz
Working voltage: DC 12V
Working temperature: -40℃ ~ +50℃
Steel pipe: 60×40×3 mm
Cabinet: 1.5mm cold plate stamping
Moving casters: 100×60 mm
Basic Configuration (per unit)
No. | Name | Specification | Unit | Quantity |
---|---|---|---|---|
1 | Detection control panel | Equipped with various detection terminals, color circuit diagram, and working principle diagram; Panel: 12009004mm | Set | 1 |
2 | Ignition switch | – | Pcs | 1 |
3 | Combination switch | – | Set | 1 |
4 | Left and right fog lamp | – | Set | 1 |
5 | Left and right headlights | – | Set | 1 |
6 | Left and right light | – | Set | 1 |
7 | Left and right combination taillights | – | Set | 1 |
8 | License plate lamp | – | Set | 1 |
9 | Light switch | – | Set | 1 |
10 | Hazard light switch | – | Set | 1 |
11 | Reverse light switch | – | Set | 1 |
12 | Brake light switch | – | Set | 1 |
13 | Mobile bench (with self-locking casters) | 1240×700×1700mm (L×W×H) | Pcs | 1 |
14 | Fault simulation and troubleshooting device | – | Set | 1 |
15 | Automatic headlight control module | – | Set | 1 |
16 | Educational and laboratory stand | “Differential” | – | – |